Isn't that a comment on the quality of the control itself? I know I've seen that before on headphone distribution.macrae11 wrote:...
1) When turning down to the minimum volume the image begins to shift, making it impossible to make mix decisions at a very low level.
...
Not necessarily the pad, but the pot is most likely analog. Monitor output controls are usually post D/A.oddioguy wrote:This assumes that the unit actually works in the analog domain at these stages.
oddioguy wrote:Do you have a schematic for your unit?
This assumes that the unit actually works in the analog domain at these stages.
macrae11 wrote:oddioguy wrote:Do you have a schematic for your unit?
This assumes that the unit actually works in the analog domain at these stages.
I have a block diagram of the unit and I sent an email to Presonus to try and get a proper schematic. I'll post the block diagram if someone tells me the best way to upload pictures to a post.
The unit is all passive analog. There is a DA but it hits the converter before it goes to the switching network
Malcolm Boyce wrote:Isn't that a comment on the quality of the control itself? I know I've seen that before on headphone distribution.
macrae11 wrote:Drumwaiter wrote:Ah crap! Now I'm gonna be broke again...
At this rate, you probably shouldn't plan on having that change ever again.
macrae11 wrote:Fireface main outs > CS Input 1
Computer soundcard out > CS Input 2
K2600 Digital Out > CS Digital Input ( So if you want to just sit down and play, you just hit the digital switch to hear your keyboard.)
CS Cue out > Headphone amp input
CS Speaker Outs > To the speakers obviously
CS Main Out > Anywhere you want, PA, Al's Control Room, Just remember no volume control on this output.
Return to The Original Gear: Maintenance, Repair and Modification
Users browsing this forum: Bing [Bot] and 5 guests